不锈钢板框压滤机

BAS不锈钢板框压滤机，是一种能采用不同过滤介质，实现粗滤、精滤、超滤的产品。使用超滤过滤介质可达到澄清、除菌的目的。整机采用不锈钢（1Cr18Ni9Ti）制造，密封圈采用硅橡胶，耐酸碱腐蚀、无毒耐高温，密封性能好、使用寿命长。产品结构新颖，造型美观、移动灵活、操作方便、经久耐用。

广泛适用于：大中医院制剂，药厂大输液、口服液生产，白酒、黄酒、饮料及化工、冶金、电子、环保等部门液体的精密过滤或除菌过滤，也可用于气体净化过滤。

　BAS stainless steel plate and frame filter press is a product which can adopt different filter media and can realize coarse filtration, precision filtration and ultrafiltration. With ultrafilter medium it can attain the goal of clarification and desterilization. The whole machine is made of stainless steel(1Cr18Ni9Ti) and the seal gaskets adopt silicon rubber, therefore the machine features acid and alkali corrosion resistance, non-toxicness and high temperature resistance, good sealing performance and long service life. It has a novel construction, nice appearance, flexible movement, convenient operation and wear well.
　This machine is widely suitable for precision filtration or aseptic filtration of the liquids such as formulation of big and medium hospitals, infusion liquid, oral liquid, spirit, rice wine, beverage and the liquids of the departments as of chemical, metallurgical, electronics and environmental protection sectors and also can be used for purifying filtration of gases.

型号含义


	BAS0.4/200-N			BAS0.6/300-N			BAS4/400-N

过滤原理和流程
Filtering Process

　过滤时，料液经进料泵输入进料通道，分别进入滤框，液体穿过过滤介质进入滤板，从滤板上的滤液出口经滤液通道汇集后从止推板滤液口排出。见过滤流程图。

　When filtration starts, the slurry enters the feed channel through the feed pump input and enters filter frames, the liquid penetrates filter medium and enters filter plates, and is discharged from the filtrate port of stationary heavy end piece after collected through the filtrate channel from the filtrate outlet on the filter plates.


	技术参数和规格
	Technical Parameters and Specification

	过滤压力 ≤0.3 MPa
	Pressure for filtration ≤0.3 MPa
	过滤温度 -5℃~150℃
	Temperature for filtration -5℃~150℃
	手动螺旋压紧
	Manual closing by the screw

规格参数 Specifications
型号 Model	过滤面积 Filter area m²	滤板尺寸 Plate size mm	板/框数 Number of plates/frame （块）	水流量 Water flux t/h	滤室容积 Chamber Volume L	电机功率 Motor power kW	进出口径 Diameter of inlet and outlet pipe mm	长×宽×高 L×W×H mm	重量 Weight kg
BAS0.3/200-N	0.3	Æ200	5/6	0.5	1.74	0.75	Æ15	710×360×720	86
BAS0.4/200-N	0.4	Æ200	8/9	0.7	2.61	0.75	Æ15	800×360×720	108
BAS0.6/300-N	0.6	Æ300	4/5	1	3.45	0.75	Æ20	720×460×810	110
BAS1/300-N	1	Æ300	8/9	1.5	6.21	0.75	Æ20	850×460×810	160
BAS1.6/400-N	1.6	Æ400	6/7	2	9.03	1.1	Æ25	890×590×920	190
BAS2/400-N	2		8/9	3	11.61	1.1		950×590×920	230
BAS3/400-N	3		12/13	4.5	16.77	1.5		1070×590×920	300
BAS4/400-N	4		16/17	6	21.93	1.5		1190×590×920	370

结构和安装

过滤机由手轮、螺杆、机座、横梁、压紧盘、压紧板、滤板、滤框、过滤介质（纸板等）、止推板、压力表、阀门、进料泵、接液盘等部件组成。两根横梁把机座和止推板连接成一个整体机架。机架底部安装有轮子，便于移动；机座上螺杆与压紧盘相接，止推板与压紧板之间交替安装滤板、滤框；过滤介质装于每块滤板之上，滤板之间构成滤室。转动手轮使与其相接的压紧盘向前移动或后退实现滤板的压紧和松开。泵的进口为软管接头可与料液管道相连，滤液出口处装有球阀和软管接头。

过滤机放置在合适位置，用管道连接好进出口，应使滤液流向低于过滤机的容器或池中，避免因滤液流向高处而减少过滤推动力，影响过滤速度和效果。